4841 What should material certificates cover for an overseas food packaging project? • Food-contact surfaces require FDA 21 CFR 177 or EU 10/2011 compliance statements plus migration test reports. • Stainless steel parts need EN 10204 Product KnowledgePackaging Machinery 💬 0 answers👁 10,426
4842 Why should product-contact parts be listed separately for a packaging machine? • The contact-parts list verifies FDA/EU 1935/2004 compliance; non-contact parts need no food-grade certificate. • List each item's material grade Product KnowledgePackaging Machinery 💬 0 answers👁 10,584
4843 Which parts need special consideration when packaging acidic powders? • Product-contact hopper, auger filler and former must be 316L stainless steel or PTFE-coated; carbon steel is prohibited. • Heat-seal jaws and sealin Product KnowledgePackaging Machinery 💬 0 answers👁 10,736
4844 Can high-salt products affect packaging machine service life? • Yes, salt (chloride) corrodes stainless and carbon steel, shortening packaging machine life. • Salt-contact parts should be 316L stainless steel, no Product KnowledgePackaging Machinery 💬 0 answers👁 9,667
4845 How should I select contact materials for a packaging machine handling corrosive products? • Test product pH and chloride level; use 316L or PTFE if pH<4 or Cl⁻>50ppm. • Ban carbon steel and aluminum on contact parts; use FKM or PTFE-e Product KnowledgePackaging Machinery 💬 0 answers👁 9,814
4846 Why should quick disassembly and cleaning be considered in packaging machine design? • Quick disassembly and cleaning shorten changeover and cleaning downtime, directly improving OEE. • Food and pharma packaging must prevent cross-cont Product KnowledgePackaging Machinery 💬 0 answers👁 9,966
4847 What should determine the cleaning frequency of a packaging machine? • Set frequency by residue risk of product-contact parts: powders/sauces per shift, dry granules weekly. • Base it on fouling rate of heat-seal jaws, Product KnowledgePackaging Machinery 💬 0 answers👁 10,118
4848 How should a packaging machine be designed for dusty production environments? • Use IP65 or higher enclosure with positive-pressure purge on the electrical cabinet to prevent dust ingress and shorts. • Seal bearings and guides o Product KnowledgePackaging Machinery 💬 0 answers👁 8,201
4849 What problems can dead zones inside a packaging machine cause? • Dead zones trap product residue, breeding bacteria and failing FDA/CE hygiene certification. • Residual material absorbs moisture and cakes, cloggin Product KnowledgePackaging Machinery 💬 0 answers👁 8,062
4850 Why are stainless-steel frames commonly required for food packaging machines? • Stainless frames (304/316L) resist washdown and food acid/alkali, meeting FDA/CE hygiene design. • Carbon steel rusts and flakes, contaminating food Product KnowledgePackaging Machinery 💬 0 answers👁 10,261
4851 How can I prevent unintended motion after a packaging machine restarts following a power outage? • Fit a power-loss memory safety relay that drops servo enable and requires manual reset. • Add PLC power-up self-check: allow start only when heat-se Product KnowledgePackaging Machinery 💬 0 answers👁 10,110
4852 Should a packaging machine HMI support multiple languages? • If operators are multilingual, the HMI must offer EN/CN/local language switching to cut misoperation. • Confirm at purchase whether PLC/HMI language Product KnowledgePackaging Machinery 💬 0 answers👁 9,958
4853 Which servo-system parameters matter most when sourcing a packaging machine? • Positioning accuracy within ±0.1mm, repeatability ±0.05mm, governs film cut registration. • Rated/peak torque must cover film-tension peaks; keep ≥1 Product KnowledgePackaging Machinery 💬 0 answers👁 9,804
4854 Why should overseas buyers confirm the electrical cabinet configuration? • Verify cabinet voltage/frequency (e.g. 380V/50Hz or 480V/60Hz) to match local grid and protect PLC/HMI. • Check breakers, contactors and servo drive Product KnowledgePackaging Machinery 💬 0 answers👁 9,652
4855 Is the PLC brand more important than the control logic in a packaging machine? • Control logic governs cycle time, film tension and heat-seal consistency, affecting yield more than brand. • Brand affects spare parts, programming Product KnowledgePackaging Machinery 💬 0 answers👁 9,500
4856 Is a fully automated packaging line worthwhile for a small factory? • If annual output <500k packs with frequent SKU changes, changeover >30min makes full automation uneconomical. • If single-shift demand <200 Product KnowledgePackaging Machinery 💬 0 answers👁 9,356
4857 Should I source a case packer together with the primary packaging machine? • Source together if case packer and primary machine share cycle time; one vendor owns line synchronization and interlocks. • Prefer same vendor to un Product KnowledgePackaging Machinery 💬 0 answers👁 9,205
4858 What practical benefits does a vision inspection system add to a packaging machine? • Inline detection of seal contamination, missing leaflet, empty or short packs with reject rate above 99.9%. • Verifies label position and printed ch Product KnowledgePackaging Machinery 💬 0 answers👁 2,290
4859 Should a packaging machine be connected to a metal detector? • Mandatory: For EU food/pharma lines, a metal detector must interlock with the packaging machine to meet CE and HACCP. • Process fit: Install the det Product KnowledgePackaging Machinery 💬 0 answers👁 2,224
4860 How should upstream and downstream equipment be matched to prevent line blockage? • Measure the wrapper cycle time (packs/min); upstream and downstream capacity must exceed it by 10%-15%. • Use a buffer hopper or accumulation convey Product KnowledgePackaging Machinery 💬 0 answers👁 3,339