What should I consider when packaging fragile products with an automatic machine?
• Choose servo-driven HFFS or VFFS with drop height ≤50mm to avoid impact breakage.
• Add buffer trays or pneumatic grippers at infeed; run cycle time below 70% of rated speed.
• Lower film tension and heat-seal pressure; set sealing temperature at low limit to prevent crushing.
• Use anti-static low-friction PE/EPE liner film to cut vibration and static adhesion damage.
• Run drop and vibration FAT; accept only if breakage rate ≤0.5%.
• Add buffer trays or pneumatic grippers at infeed; run cycle time below 70% of rated speed.
• Lower film tension and heat-seal pressure; set sealing temperature at low limit to prevent crushing.
• Use anti-static low-friction PE/EPE liner film to cut vibration and static adhesion damage.
• Run drop and vibration FAT; accept only if breakage rate ≤0.5%.